Round Swirl (1) Serving Tray Router Template

21.00 USD 29.00 USD

Router Template dimensions: 11.75″ x 11.75″

Template is available in 4 mm high quality plywood or 6 mm clear acrylic.

Description

Make your own serving trays using router templates. This template allows you to create a 12 inch round serving tray with 1 single outer compartments in a swirl formation around a circle in the middle. 

How to use:

  • Secure the template to your board using this template tape
  • Use a router bowl & tray bit to carve out the inside of each compartment
  • Cut away the excess wood around the template using a bandsaw or jigsaw, leaving 1/8″ material or less outside the line
  • Use a flush trim bit mounted in your router table to follow the template and finish shaping the serving tray
  • Round over all the edge using a roundover bit

Reusable template: This plywood template can be reused if removed carefully and used with this double-sided tape (which won’t damage the wood or leave any residue). Plywood templates may not be suited for large batch production; select acrylic option instead.

Dimensions: 

Template is 11.75” x 11.75” (300 x 300 mm)

Template is available in 4 mm high quality plywood or 6 mm clear acrylic.

 

Recommended tools:

 

Additional information

Material

Plywood, Acrylic

Reviews

There are no reviews yet.

Be the first to review “Round Swirl (1) Serving Tray Router Template”

Your email address will not be published. Required fields are marked *