Description

Create perfect inlays using router inlay templates.

Use this ‘Evergreen Tree’ template to add a unique touch to cutting boards, charcuterie boards, toy chests, or any other wooden object. 

How to use: This template is designed to be used for WOOD inlays using a router inlay kit. See more recommend tools and step by step process below.

Reusable template: This acrylic template can be reused multiple times if removed carefully and used with this double-sided tape (which won’t damage the wood or leave any residue). 

Dimensions:

Template is 5.75” wide by 8” tall (146 x 203 mm)

Tree profile is approximately 3.2” wide by 5” tall (80 x 127 mm)

Template is made from 6 mm thick clear acrylic.

Recommended tools:

• This router template
• Plunge router
• Router inlay kit
• Straight bit
• Double-sided tape

Recommended process – WOOD inlay:

1. Secure your workpiece to the work surface.
2. Secure the template to your workpiece using this double-sided tape.
3. Make sure to center your router’s base plate using the centering pin included in the router inlay kit.
4. Using the 1/8 spiral bit and guide bushing with the collar, follow the inside contour of the template (in a clockwise direction) to carve the outline of the shape.
5. Use a larger straight bit like this one to carve out the rest of the inner shape (remove the guide bushing for this).
6. Carefully remove the template. Secure it to the blank you want to use to cut the inlay shape using double-sided tape.
7. Using the 1/8 spiral bit and guide bushing without the collar, follow the inside contour of the template (in a clockwise direction). Make sure to keep the guide bushing tight against the template at all times.
8. Carefully remove the template. Use a bandsaw to release the shape from the blank.
9. After a test fit (it helps to sand the corners on the backside) apply glue and tap into place using a rubber mallet. Clamp and let dry.
10. Sand until flush, then apply finish.